It is important that before each session, you record (or verify previous settings) the scalp locations where data is being recorded/trained. This helps to keep training records clear and is an extra step that is necessary to ensure you can compare the data recorded at each site appropriately later. After creating the Player and…
If you experience issues such as: Text not fitting on buttons or Odd text wrapping inaccessible Text or Number boxes Text too small to read, tiny text on screen These issues can be caused by a DPI Setting above 100% on the computer’s Display Settings. Many of today’s higher resolution monitors will automatically…
If you receive an error like: “There was a problem communicating with the server. Please check your internet connection” when signing into the Web Remote Test, try the following suggestions: First, make sure your connection is Secure. Check the address bar to see if you see the Padlock symbol or a “Not Secure” warning. If…
Once you have assigned a remote test code, a message box will appear with both the Test Code and the Password for the person you just registered to test. You can email or print out this information for future use. This screen will also display either the link to the iOS app for installation…
The Global Training Clinician screen can be configured for any EEG frequency band of at least 2 Hz between 0.5 Hz and 48 Hz. The Global Training screen provides up to 4 Filters which, when configured and enabled, are applied to EVERY configured channel on your EEG amplifier.
The Relax Your Face Clinician screen is pre-configured to reduce or downtrain the presence of EMG facial tension from the signal. It is configured to reduce 33-48 Hz on up to 2 channels.
The Basic Training Clinician screen can be configured for any EEG frequency band of at least 2 Hz between 0.5 Hz and 48 Hz. The Basic Training screen provides 2 Filters which can be applied 2 filters on one channel OR One filter for each of 2 channels. For example, the Basic…
Below are instructions for the MindWave Mobile II connection process. There are three parts to the process which I have broken down into sections below. First you will connect the external Bluetooth receiver to your PC (if your PC already has an internal receiver then you can skip this step). Second you will pair the…