Connecting Sensor Cables 4 Channel SmartMind EEG Station
9 articles SmartMind Setup
Adding/Creating Players in SmartMind
From the opening SmartMind screen, click on “Add New Player” which will open the Player Information dialog box. Here you can enter a new player’s first and last name, screen-name, gender and birthday. At the top of the Add Player box is the Player ID. The Player ID is randomly generated and cannot be changed. …
SmartMind Filter Controls and Setup
Filter Controls The Filter controls vary slightly between the Clinician Screens. For instance, only the Basic Training clinician screen actually displays the “Raw” amplitude signal. The others only display the Corrected signal which is used for reward feedback. On some Clinician Screens, you cannot change the frequency directly but rather must enter a Control Box…
Connecting Sensor Cables to Optima+ 4 BT
Connecting Sensor Cables to Optima 2 BT
Selecting Neurofeedback Protocols for use with SmartMind
Our SmartMind system does require that the healthcare professional using it have the knowledge, training and understanding of how to use neurofeedback. Our system can be used in the same way as many other similar software packages. One approach is to work with someone locally who knows how to implement neurofeedback and have them provide…
Disposable Sensor Placement with SmartMind
Locate the set of 3 cables that are bound together. (see example) You will also need 2 of the large (1 7/8″ x 1 7/8″) disposable sensor pads and 1 of the small (1 7/8″ x 7/8″) disposable sensor pads. Locate and measure the active location on the scalp where you will be recording from…
Using Baselines to Configure Artifact Sensitivities and Training Thresholds
The instructions below guide you through the general procedure for setting Training Thresholds in the SmartMind system. These instructions were generated using the Basic Training Clinician screen, but the steps are the same for each Clinician screen though the screenshots may differ slightly. Note: Before setting thresholds, you must first choose your Filter settings and…
Getting Started with SmartMind
This article is meant to provide a general overview of the steps necessary to start a training program with SmartMind. We do not provide guidance of appropriate training protocols, (i.e., which EEG Frequencies to train and where). Step 1: Decide on an appropriate EEG Training Protocol. BrainTrain does not provide guidance or recommendations for protocols…